IMDES Mini Benchtop Vapour Phase 400 x 290 x 370mm Description
The MINI-CONDENS-IT PROFILER,-is intended to use for reflow soldering printed circuit boards on the smaller scale, i.e. for individual pieces, proto types and small series. It is specially designed to use it for developing purposes of prototyping PCB’s using BGAs, LGA’s components and stacked arrays. Due the small foot print of the MINI-CONDENS-IT PROFILER, forced air cooling, single phase you will able to place unit fast on every place you want use it. After placing it is running quickly and ensures at the same time highest solder quality. For intensive use, appropriately frequent checks and maintenance are required, due to the low GALDEN capacity .
IMDES Mini Benchtop Vapour Phase 400 x 290 x 370mm Features
Table model Top loader
Adjustable temperature profiles in the pre-heating zone (CVPRS*)
Adjustable TAL Time Above Liquid
ATS Anti Tomb Stone modus
Micro USB for the transfer of solderprofile data to PC
Window to observe the soldering process
Suitable for BGA’s, Stacked Packages
Oxygen Free Soldering
Homogeneous temperature transmission on the complete Assembly
No over heating of components
*Creative Vapor Phase Reflow Software
IMDES Mini Benchtop Vapour Phase 400 x 290 x 370mm Specifications
|
Power Supply |
Single Phase 220-240 Volt / 50-60 Hz |
|
Power Connector |
Three Prong Power Connector |
|
Max. Heating Capacity |
1000 Watt (ca. 5 A) |
|
Dimensions |
400 x 290 x 370 mm (L x W x H) |
|
Max. PCB Size |
250 x 190 x 20mm (L x W x H) |
|
Standard Cycle Time |
10 minutes |
|
Process temperature (depends on medium type) |
150 °C up to 240 °C = 302 °F up to 464°F |
|
Weight |
5 kg |
|
Solder Profiles |
Adjustable temperature profiles in the pre-heating zone (CVPRS*) |
|
TAL Time Above Liquid |
Adjustable TAL Time Above Liquid |
|
ATS |
Anti Tomb Stone modus (ATS) |
|
Micro USB Interface |
for the transfer of solder profile data to PC |
|
Cooling |
Forced Air cooling down to 70°C = 158 °F |
|
Storage Temperature |
-1°C to +70°C 30,2°F to 158°F |
|
Heat Transfer Medium |
GALDEN LS with the boiling temperature as needed (max. 240°C max 464°F) |
|
Medium basic filling quanity |
300 - 350 ml GALDEN |
| Out of Stock Availability | Available with short lead time |
|---|
Add More 
