PACE WJS 100 High Power Soldering Station with TD-100 Iron

PACE WJS 100 High Power Soldering Station with TD-100 Iron Overview

The WJS 100 is fully programmable, loaded with features (Temperature Setback & Auto-Off; Password Lockout, Temperature Range setting and more), and incorporates PACE’s exclusive IntelliHeat™ Control Technology. The unit can be upgraded by adding the optional Instant Setback Cubby which places the iron into Setback Mode after 45 seconds of non-use. This significantly extends tip life, especially when working with lead-free solders (see WJS 100 with Instant Setback Cubby). And you can use the optionally available MT-100 MiniTweez Surface Mount Rework Tweezer with the WJS 100 with its new WJS High performance tweezer tips, part numbers 1128-1001-P1 through 1128-1011-P1.

PACE WJS 100 High Power Soldering Station with TD-100 Iron Features

• Nearly twice the maximum power output increases performance and through-put at safer, lower temperatures - even on the heaviest loads! 
• Lowest cost of ownership: Single point WJS Tip-Heater Cartridges cost approximately $12 (US). Compare that to the much higher prices of Hakko, Metcal, Easy Braid and JBC tips!
• Quick Change Tips can be changed in seconds without tools, and most tips heat up within 10 seconds flat!
• Adjustable and accurate temperature control ensures that operators are not locked into a single temperature. Compare Metcal, Easy Braid or Thermaltronics, which require separate (expensive) tips to be purchased for each temperature desired!
• Instantaneous Load Sensing and On-Demand Power: Thermal demand is continuously monitored and the heater responds immediately by providing power to meet the demand from the work, without overshoot.
• IntelliHeat Control Technology
• Tip and Tool Stand with Sponge & Stay-Moist Well, non-abrasive Brass Wool to clean oxidation from tip and holds 6 tips
• Optional Instant Set-Back Cubby available for extending tip life
• Completely ESD/EOS safe; ESD Grounding jack
• Durable aluminum extrusion housing incorporates "T-Slots" for mounting
• Capabilities can be expanded by addition of optional MT-100 MiniTweez Surface Mount Rework Tweezer
• Can be mounted under bench or shelf with optional Bracket pn 1321-0609-P1 Stackable

PACE WJS 100 High Power Soldering Station with TD-100 Iron Specifications

• Power Requirements: 97-127 VAC, 50/60Hz, 90 Watts Max/197-253 VAC, 50/60Hz, 120 Watts Max
• Control Interface: LED Display, 3 Buttons and fully programmable menu
• Control Technology: IntelliHeat
• Temperature Accuracy: Meets or exceeds ANSI-J-STD
• Absolute Temperature Stability: 1.1°C (° 2 °F) at idle tip temp.
• Temperature Range: 205° to 454°C (400° to 850°F) Nominal
• System Can be Calibrated: Yes
• Tips: 1128 Series Tips Only
• Handpiece: Commemorative 50th Anniversary TD-100
• Tip to Ground Resistance: 2 ohms or less