Pace ST 70 Power Module Controlled Soldering Station

Pace ST 70 Power Module Controlled Soldering Station Overview

The ST 70 is a single channel system that comes equipped with the TD-100 Tip-Heater Cartridge Soldering Iron, considered by many to be the most comfortable soldering handle available. Unlike Metcal/Easy Braid/Thermaltronics "curie point' technologies, which requires the user to buy expensive tips to change temperature, the ST 70 regulates temperature via the use of 8 different Power Modules™. You never have to buy additional tips to change temperature with the ST 70!

Pace ST 70 Power Module Controlled Soldering Station Features:

• IntelliHeat Control Technology
• Performance level lockout (if Power Module is removed the system is sut down)
• ESD grounding jack
• ESD Safe metal housing
• Stackable
• Supplied with 6.5, 7 & 7.5 Power Modules
• Can be mounted under workbench or shelf with optional bracket

Pace ST 70 Power Module Controlled Soldering Station Specifications:

• Power Requirements: 97-127 VAC, 50/60Hz, 90 Watts Max/197-253 VAC, 50/60Hz, 90 Watts Max
• Control: Power Module
• Control Technology: IntelliHeat
• Tip to Ground Resistance: 2 ohms or less
• Temperature Accuracy: N/A
• Absolute Temperature Stability°:  1.1°C (° 2 °F) at idle tip temp.
• Temperature Range: Tip Heater Compatible Handpieces = 205° to 454°C (400° to 850°F) Nominal 
  SensaTemp Compatible Handpieces = 176°(Dial)or 37°C (Digital Display) to 482°C (350°(dial)or 100° (Digital Display) to 900°F) Nominal
• System Can be Calibrated: Yes