Pace MBT-301 Digital Rework System 2 Channel

Pace MBT-301 Digital Rework System 2 Channel Overview

MBT 301 with TD-100 - The MBT 301/E is a multi-technology system with two individually controlled, continuously active handpiece channels..  Comes with the TD-100 and SX-100.This configuration features the TD-100 Thermo-Drive iron that delivers the highest level of performance.  The TD-100 uses tip-heater cartridge tips that posess amazing thermal performance.  This configuration is ideal for production environments where high volumes and efficiency dictate the working environment.To really protect your more expensive Tip-Heater Cartridge and fine point tips from oxidation, the TD-100 can be used with the new "Instant-SetBack Cubby". The cubby puts the irons channel into SetBack if it is in the cubby for more than 45 seconds! Up to two Instant-SetBack Cubby can be connected to the MBT 301.

Includes TD-100 Thermo-Drive Iron & SX-100 Sodr-X-Tractor (IntelliHeat Versions).  5 optional handpieces are available.PAC80070479MBT301MBT301EMBT-301E

Pace MBT-301 Digital Rework System 2 Channel Specifications

• Power Requirements: 120 VAC, 60Hz (240 watts maximum) & 230VAC, 50Hz (240 wats Maximum)
• Handpiece Technology CompatabilityI: ntelliHeat
• Tip to Ground resistance: <2ohms
• Temperature Stability: +/- 1.1C (2F)
• Temperature accuracy: Meets or exceeds ANSI-J-Std-001
• Set Temp Range: Tip Heater Cartridge Compatible Handpieces = 205° to 454°C (400° to 850°F) Nominal 
  SensaTemp Compatible Handpieces = 37°C to 482°C (100° to 900°F) Nominal
• Vacuum Rise Time: 150ms Average as measured with PACE Process Monitor
• Vacuum: 20in Hg max
• Pressure: 18psi max
• Air Flow: 8 SLPM max