Multicore 60/40 362 0.71mm 0.5kg

ROSIN BASED CORED SOLDER WIRE FLUXES

Properties of Multicore 362 and 366 solid fluxes for cored solder wire:

• Good wetting on most common surfaces
• Two activity levels: Multicore 362 for general work and Multicore 366 for more difficult surfaces
• Non-corrosive
• Fast soldering
• Rosin based
• Halide activated

Product Range

Multicore 362 and 366 cored wires are manufactured with a range of flux contents. Although users will normally be using products with a nominal flux content of 3%. Multicore 362 and 366 cored wires are available in a variety of alloys conforming to J-STD-006 and EN 29453 or alloys conforming to similar national or international standards. For details refer to document “Properties of Alloys used in Cored Solder Wires”. A wide range of wire diameters is available. Alternative flux contents and alloys may be manufactured to special order.

Technical Specifications

Alloys: The alloys used for Multicore flux cored solder wires conform to the purity requirements of the common national and international standards. A wide range of wire diameters is available manufactured to close dimensional tolerances. For details refer to document “Properties of Alloys used in Cored Solder Wires”.

Flux: Multicore 362 and 366 solid flux leave dry and nonsticky residues. In use its odour is typically that of rosin fluxes.