Metcal System Single Output Rework Precision Tweezer
The MFR-1100 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge or tweezers and offers a choice of four hand-pieces. The MFR-1140 comes with a precision Tweezer hand-piece to rework SMD components with fine dimension to large blade geometries.
Metcal System Single Output Rework Precision Tweezer Features and Benefits
Metcal System Single Output Rework Precision Tweezer Comprises of
NOTE: No tip/cartridge included
Tips / Cartridges Series compatible with this system:
Metcal System Single Output Rework Precision Tweezer Technical Information
| Power Supply | |
| Ambient Operating Temperature: | 10 - 40°C (50°F - 104°F) |
| Maximum Enclosure Temperature: | 55°C (131°F) |
| Input Line Voltage: | 100 - 240 VAC |
| Input Line Frequency: | 50/60 Hz grounded circuit |
| Power Consumption: | 65 Watts maximum |
| Output Power: | 60 Watts maximum |
| Output Frequency: | 450 KHz |
| Power Cord: | (3-wire) 183 cm 18/3 SJT |
| Dimensions (approx.) W x D x H: | 90mm (3.5”) x 200mm (8”) x 152.5mm (6”) |
| Weight: | 2.3kg (5.05 lbs) |
| Surface Resistivity: | 105-109 Ohms |
| Certification / Marking: | cTUVus, CE |
| Handle and Workstand | |
| Tip-to-Ground Potential: | < 2 mV RMS |
| Tip-to-Ground Resistance: | < 2 ohms |
| Idle Temperature Repeatability: | +/- 1.1°C (2°F) in still air |
| Handle Cord Assembly Length: | 122cm - burn proof, ESD safe Connector 8-pin circular DIN |
| Workstand W x D x H: | 100mm x 200mm x 100mm (4" x 8" x 4") |
| Workstand Weight: | 0.69 kg (1.51 lbs) |
| Out of Stock Availability | Available with short lead time |
|---|
Add More 
