JBC 4 Tools DME Station with Pneumatic Pump 230V (Cartridges Not Included)

JBC 4 Tools DME Station with Pneumatic Pump 230V Product Information

The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The MVE Pneumatic Desoldering Module is indispensable for a complete desoldering process. Clean and dry compressed air is required.

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modeshelp to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

Although the Control Unit is compatible with 10 different JBC tools, the DMPSE works simultaneously with the T210 Precision Purpose Handle, the T245 General Purpose Handle, the AM120 Micro Tweezers and the DR560 Desoldering Iron.

NOTE: CARTRIDGES NOT INCLUDED

JBC 4 Tools DME Station with Pneumatic Pump 230V Special Features

• Sleep & Hibernation Mode: These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.

• Max. and min. temperature: Limit the temperature range in which the operator is allowed to work.

• Temperatue levels: Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.

• Soldering graphics: Real time visualization of tip temperature and power delivered to the solder joint during soldering process.

• PIN protection: Keep station parameters protected against unauthorized access.

• 10 user interface languages: English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.

JBC 4 Tools DME Station with Pneumatic Pump 230V Product Composition

Modular System: DME, MVE-A

Tools: AM120-A, T210-A, T245-A, DR560-A

Stands: SCH-A, AD-SE, AM-SA, DR-SE

Cartridges: Cartridges not included

Cleaning Systems: CL8499

JBC 4 Tools DME Station with Pneumatic Pump 230V Selectable Parameters

JBC 4 Tools DME Station with Pneumatic Pump 230V Connectivity

• USB-B (rear): Software PC / Traceability

• USB-A (front): Firmware update. Soldering Graphics / Profiles management. Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.

• Robot: RS-232 remote control or Smart Fume Extractor connection

• LAN: Remote control / Traceability

• PS: Interconnection of up to 5 PSE control units to manage up to 24 tools simultaneously.

• Equipotential bonding

JBC 4 Tools DME Station with Pneumatic Pump 230V ESD/EOS

Tip to ground resistance: <2 ohms

Tip to ground voltage: <2 mV RMS

JBC 4 Tools DME Station with Pneumatic Pump 230V Power Supply