JBC 2 Tools DME Station with Pneumatic Pump 230V Product Information
The DME manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
The MVE Pneumatic Desoldering Module is indispensable for a complete desoldering process. Clean and dry compressed air is required.
It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modeshelp to extend life of tips.
It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.
The DMVE works simultaneously with the DR560 Desoldering Iron and the T245 Handle.
NOTE: CARTRIDGES NOT INCLUDED
JBC 2 Tools DME Station with Pneumatic Pump 230V Special Features
Sleep & Hibernation Mode: These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Max. and min. temperature: Limit the temperature range in which the operator is allowed to work.
Temperatue levels: Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
Soldering graphics: Real time visualization of tip temperature and power delivered to the solder joint during soldering process.
PIN protection: Keep station parameters protected against unauthorized access.
10 user interface languages: English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.
JBC 2 Tools DME Station with Pneumatic Pump 230V Selectable Parameters
Temperature: 90 to 450 ºC / 190 to 840 ºF
Dynamic Soldering Profiles: Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the component through all the phases of the soldering process. Up to 25 fully configurable soldering profiles can be stored.
JBC 2 Tools DME Station with Pneumatic Pump 230V Product Composition
Modular System: DME, MVE-A
Tools: T245-A, DR560-A
Stands: AD-SE, DR-SE
Cartridges: Cartridges not included
Cleaning Systems: CL84999
JBC 2 Tools DME Station with Pneumatic Pump 230V Connectivity
USB-B (rear): Software PC / Traceability
USB-A (front): Firmware update. Soldering Graphics / Profiles management. Dino-Lite USB microscope connection. Compatible models: AM2011 and AM2111.
Robot: RS-232 remote control or Smart Fume Extractor connection
LAN: Remote control / Traceability
PS: Interconnection of up to 5 PSE control units to manage up to 24 tools simultaneously.
Equipotential bonding
JBC 2 Tools DME Station with Pneumatic Pump 230V ESD/EOS
ESD safe
Tip to ground resistance: <2 ohms
Tip to ground voltage: <2 mV RMS
JBC 2 Tools DME Station with Pneumatic Pump 230V Power Supply
Peak power: 160 W per tool – 23.5 V
Voltage (AC): 230 V
Ambient operating temp: 10 to 40 ºC / 50 to 104 ºF
JBC 2 Tools DME Station with Pneumatic Pump 230V Dimensions & Weight
Control Unit: See individual modules
Package: 368 x 474 x 195 mm / 10.62 kg
| Out of Stock Availability | 1-2 weeks delivery |
|---|
Add More 
