JBC 2 Tools DDE Station with Pneumatic Pump 230V (Cartridges Not Included)

JBC 2 Tools DDE Station with Pneumatic Pump 230V Product Information

DDVE station is a complete solution with T245 General Purpose Handle and DR560 Desoldering Iron.

The DDE Control Unit manages up to 2 tools simultaneously and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.

The MVE Pneumatic Desoldering Module generates the vacuum needed to remove the molten solder from plated through holes and surface mount pads with the DR560. (It requires clean and dry compressed air supply).

It provides the best soldering quality thanks to JBC Most Efficient Soldering System and additionally Sleep & Hibernation modeshelp to extend life of tips.

It features all the Excellence range benefits such as station customization, full control of soldering processes and remote work management.

With the practical Cartridge Holder SCH-A the different cartridges are always stored nearby.

NOTE: CARTRIDGES NOT INCLUDED

JBC 2 Tools DDE Station with Pneumatic Pump 230V Special Features

• Sleep & Hibernation Mode: These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.

• Max. and min. temperature: Limit the temperature range in which the operator is allowed to work.

• Temperatue levels: Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.

• Soldering graphics: Real time visualization of tip temperature and power delivered to the solder joint during soldering process.

• PIN protection: Keep station parameters protected against unauthorized access.

• 10 user interface languages: English, German, Spanish, French, Italian, Portuguese, Russian, Japanese, Korean, Chinese.

JBC 2 Tools DDE Station with Pneumatic Pump 230V Product Composition

Modular System: DDE, MVE-A

Tools: T245-A, DR560-A

Stands: AD-SE, DR-SE

Cartridges: Cartridges not included

Cleaning Systems: CL8499

JBC 2 Tools DDE Station with Pneumatic Pump 230V Selectable Parameters

Dynamic Soldering Profiles: Designed to avoid thermal shock when soldering Ceramic Chip components like MLCC, this new and unique feature allows controlling the heating ramp up rate of the tool to gradually increase the temperature of the component through all the phases of the soldering process. Up to 25 fully configurable soldering profiles can be stored.

JBC 2 Tools DDE Station with Pneumatic Pump 230V Connectivity

USB-A (front): Firmware update Soldering Graphics management

Robot: RS-232 remote control or Smart Fume Extractor connection.

JBC 2 Tools DDE Station with Pneumatic Pump 230V Power Supply

JBC 2 Tools DDE Station with Pneumatic Pump 230V Dimensions & Weight

Control Unit: See individual modules

Package: 368 x 474 x 195 mm / 9.85 kg

JBC 2 Tools DDE Station with Pneumatic Pump 230V Other Specifications

Vacuum: 90% / 680 mmHg / 26.8inHg

Flow Rate: 15 SLPM

Air pressure supply: up to 6 bar