DeoxIT D-Series Wipes 100% Solution 50 Pack D50W Overview
DeoxIT® D-Series contact cleaner is a fast-acting deoxidizing solution that cleans, protects, lubricates and improves conductivity on all metal connectors and contacts.
Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discolored, it is severe. DeoxIT® dissolves the contamination and protects the surface.
For reference, DeoxIT® has approximately 20% cleaning action.
DeoxIT D-Series Wipes 100% Solution 50 Pack D50W Key Features
Improves Conductivity
Deoxidizes, Cleans and Preserves
Reduces Intermittent Connections
Reduces Arcing & RFI
Reduces Wear & Abrasion
Temperature Range, -34 C (-29 F) to +200 C (400 F)
DeoxIT D-Series Wipes 100% Solution 50 Pack D50W Applicator
Cotton Wipes, 1.75 x 1.75″, provides NO flushing action, applies 100% DeoxIT®.
DeoxIT D-Series Wipes 100% Solution 50 Pack D50W Formulation
100% DeoxIT®.
DeoxIT D-Series Wipes 100% Solution 50 Pack D50W Use
When contact and connector are easily accessible. Provides wiping action – wipe with the grain recommended. No flushing action.
DeoxIT D-Series Wipes 100% Solution 50 Pack D50W Additional Notes
Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.