Pace ST 450E Convective Pre-Heater

Pace ST 450E Convective Pre-Heater Overview

The ST 450 is an analog, closed loop, temperature controlled convective 1500 W preheater. The heating area is 140mm x 140mm (5.5" x 5.5"). This preheater is ideal for applications where focused hot air is desirable or where cooling air is required after the application of heat such as area array applications.Additionally, the nature of hot air allows heat to get into those hard to reach places all too common on today"s electronics.

Pace ST 450E Convective Pre-Heater Features

The ST 450 can be used as is, or one of 3"air wash" nozzles can be attached to focus the heat where it is needed (4.5" Air Wash Nozzle 4058-0003-P1 is supplied with the system).

The ST 450 can be used as a stand-alone unit with either the ST 525/ST 550 PCB holder or can be used with the ST 300, ST 325, or ST 350. When used with the ST 325/ST 350 (with the optional software package) the heater activity of the ST 450 can be controlled through the ST 325 or ST 350.

The ST 450 is completely self-contained and when in cooling mode, the airflow is increased to 50 cfm.

Pace ST 450E Convective Pre-Heater Specifications

• Power Requirements: 197-253 VAC, 50/60 Hz 1500Watts max.
• Temperature stability: 3°C (5 °F) at idle tip temp.
• Absolute Temperature Stability: Meets or exceeds ANSI-J-STD
• Temperature range: 37-205°C (100-400°F)
• Heating Airflow: 35 cfm
• Cooling Airflow: 50 cfm
• Dimensions: 105mm (4.1")H x 178mm (7")W x 318mm (12.5")D
• Weight: 2.4kg (5.3lbs)