The MFR-1351 features a soldering hand-piece and a desoldering gun. The power supply has an internal pump providing 0.7 bar of vacuum suction force combined with Smartheat® technology that makes soldering, rework and through-hole desoldering easy and safe.
Metcal System MFR Solder/Desolder Internal Pump Features and Benefits
Tips / Cartridges Series compatible with this system
Metcal System MFR Solder/Desolder Internal Pump Comprises of
NOTE: No tip/cartridge included
Metcal System MFR Solder/Desolder Internal Pump Technical Specifications:
| Input Line Voltage: | 100-240 VAC |
| Input Line Frequency: | 50/60Hz |
| Power Consumption: | 110 Watts max. (Power Supply MFR-PS1300) |
| Output Power: | 60 Watts Max (RF SmartHeat® Power) |
| Output Frequency: | 450 KHz |
| Idle Tip temperature stability: | +/- 1.1°C (34°F) in still air |
| Ambient Operating Temperature: | 10 - 40°C (50 - 104°F) |
| Maximum Enclosure Temperature: | 55°C (131°F) |
| Noise level: | < 55 dB |
| Vacuum suction force: | 0.7 bar (21in Hg at Vacuum pump at sea level) |
| Power Cord (3-wire: | 183cm (72") |
| Desolder Hand-piece cable length: | 152 cm (60"), burn proof, ESD safe |
| Hand piece connector: | 8 pin power connector |
| Tip to ground Potential: | <2mV |
| Tip to ground resistance: | <2 Ohms |
| Surface Resistivity: | 105 – 109 Ohms |
| Approvals: | cTUVus, CE |
| Dimensions (approx.) W x D x H: | 170mm x 200mm x 152.5mm (7" x 8" x 6") |
| Workstand dimensions: | 100mm x 200mm x 100mm (4" x 8" x 4") |
| Out of Stock Availability | Available with short lead time |
|---|
Add More 
