Metcal Dual Output 2 Tip Soldering Iron Handpieces
Like the MFR-1100 Series, the MFR-2200 offers the same choice of multiple hand-pieces but with two ports. Flexibility can be increased by locking both systems together. The MFR-2222 includes two Soldering tip hand-pieces.
Metcal Dual Output 2 Tip Soldering Iron Handpieces Features and Benefits
Metcal Dual Output 2 Tip Soldering Iron Handpieces Product Comprises of
NOTE: No tip/cartridge included
Tips / Cartridges Series compatible with this system:
| Technical Information | |
| Input Line Voltage / Frequency: | 100- 240 VAC , 50/60 Hz grounded circuit |
| Power Consumption: | 130 Watts maximum |
| Output Power Maximum: | 60 Watts max. at 22°C per output (two outputs) |
| Idle Temperature Stability: | ± 1.1°C (2°F) |
| Ambient Operating Temperature: | 10- 40°C (50°F - 104°F) |
| Maximum Enclosure Temperature: | 55°C (131°F) |
| Power Cord 3-Wire: | 183cm (18/3") SJT (S = 600 Volt Service Cord, J = JuniorService - 300 Volt, T = Thermoplastic) |
| Hand-piece Cable Length: | L=122cm (48"), burn resistant, ESD safe |
| Hand-piece Connector: | 8-pin cicular DIN |
| Tip-to-Ground Potential: | < 2mV |
| Tip-to-Ground Resistance: | < 2 ohms |
| Certification / Marking: | cTUVus, CE |
| Power Supply Dimensions w x d x h: | 170mm x 200mm x 152.5mm (7" x 8" x 6") |
| Workstand Dimensions w x d x h: | 100 mm x 200 mm x 100 mm (4" x 8" x 4") |
| Surface Resistivity | 105-109 Ohms |
| Out of Stock Availability | Available with short lead time |
|---|
Add More 
