Loctite 680, Very High Strength Fast Cure Retaining Compound, 250ml Overview
Loctite 680, Very High Strength Fast Cure Retaining Compound, 250ml is a high strength, high viscosity room temperature curing adhesive used to join fitted cylindrical parts. It fixtures in 10 minutes and provides a shear strength of 4,000 psi. Capable of filling diametral gaps up to 0.015 in. (0.38 mm). Loctite 680 allows relaxed machining tolerances, and replaces clamp rings, set screws, and snap rings. Gives best resistance to dynamic, axial and radial loads. Recommended for retaining shafts, gears, pulleys and similar cylindrical parts. NSF/ANSI 61 Certified. ABS Approved.
Loctite 680, Very High Strength Fast Cure Retaining Compound, 250ml Technical Feature
Agency Approvals / Specifications: NSF/ANSI 61, ABS, CFIA Listed
Applications: For Slip Fitted Parts
Color: Green
Cure Type: Anaerobic Cure
Diametrical Clearance (Maximum) (in.): 0.015
Fixture Time: 10 min.
Full Cure Temperature (°C): 25
Full Cure Temperature (°F): 77
Full Cure Time: 24 hr.
Gap Fill (in.): 0.015
Key Characteristics: Strength: High Strength
Shear Strength, Steel (psi) 4000
Specific Gravity (g/l @ 25°C): 1.1
Temperature Range (°C): -54 to 149
Temperature Range (°F): -65 to 300
Viscosity (Brookfield mPa.s (cP)): 4000
Viscosity Temperature (°C): 25
Viscosity Temperature (°F): 77
Out of Stock Availability | Available with short lead time |
---|